Cast-Resin-Transformfer
    Portable Safety Transformers UAE - Intact Controls
    Cast-Resin-Transformfer
    Portable Safety Transformers UAE - Intact Controls

    Cast Resin Transformers

    The INTACT Cast Resin Transformer has succeeded in combining the advantage of oil-filled and conventional dry type transformers, which are fabricated with an epoxy resin. The windings are completely embedded under vacuum conditions. This casting method makes it possible to assure void-free epoxy penetration of both the inner layer and turn to turn insulation.

    Category:
    • Environmentally safe
    • Moisture proof
    • No partial discharge
    • Low noise
    • High overload capability
    • High impulse strength
    • Maintenance free
    • Fire resistant

    General Specifications:

    • Power capacity Single phase : 20 ~ 2,000kVA Three phase : 50 ~ 15,000kVA
    • Rated voltage HV COIL : up to 36kV LV COIL : up to 600V * Dual High voltage coils can also be supplied.
    • Standard Tapping range : ±2.5%, ±5% * Other ratings are available by request
    • Frequency : 50Hz, 60Hz
    • % Impedance voltage : 4 ~ 8%
    • Connections
    • HV COIL : Delta
    • LV COIL : Star with neutral point * Other connections are available to meet requirement
    • Temperature class (According to IEC 60076-11) HV Coil and LV Coil : CLASS F (* Class H coils are available by request)
    • Conductor : Copper Or Aluminum
    • Noise Level (according to NEMA Std.) 500kVA – 60dB 750kVA – 64dB 1000kVA – 64dB 1500kVA – 65dB 2000kVA – 66dB 2500kVA – 68dB *Noise reduction TRs are available by request.
    • Standards : IEC 60076-11 Or ANSI / IEEE C57.12.01 Or BS 7806 * Transformers for rectifier applications and other special purposes can be supplied according to the client’s specification.

    Standard Accessories:

    • HV & LV terminals
    • Lifting lugs
    • Grounding terminals
    • Name plate
    • Danger label
    • Tap terminal link
    • Protection cap for tap terminal
    • Anti-vibration pads

    Optional Accessories

    • Wheels
    • Cooling fan & temp. controller
    • Digital thermometer & PT 100
    • Enclosure (IP-23, IP-31 etc.)